Water could drain according to specific requirements for an air conditioner. Because an air conditioner uses water evaporates, so different types of air conditioners need to take the corresponding measures in the process of using, so as not to cause secondary damage to the equipment. Water out of the air conditioning machine could be timely drainage, otherwise, there may be corrosion and other problems.
At this point, we need to establish a correct understanding of water draining, which is based on different operating conditions, free from hidden danger factors. Drainage is only valid under certain conditions. Otherwise, it would not meet practical needs.
How Much Water Should Drain from an Air Conditioner?
For air conditioners that use water to cool, finding out how much water could drain from an air conditioner is the first thing you need to know. The drain pan may be the right size so that it won’t overflow to avoid water damage to the floor.
Air conditioning equipment in the work process may take in a certain amount of water evaporated, but also with the help of condensate line and drain pipe precipitation. Generally speaking, so long as it can meet user demand for cooling and heating can be considered normal operation.
If due to poor drainage caused by too much water during the use of indoor wall damping phenomenon, you could check whether there is a problem with the machine itself or condensate line leakage place. If wet spots appear on walls near the machine have repeatedly happened with no reason apparent, It can be concluded that the drainage is not good enough, resulting in too much water.
An average air conditioner could drain anywhere from 15 to as high as 75 litres of water. An arid climate, relative humidity, humid air and more all are factors in how much water the central air conditioner is draining.
What Should I Do if There is a Need to Add Some Water?
If you want to add some water yourself during use or at night, make sure that it is clean and safe for drinking (drinking) before adding it to your air conditioner device. This water may gather in the condensate drain pan from the air conditioner’s evaporator coils. Before using tap water directly without any treatment process, you may want to identify whether its quality has met the requirements. If you use water directly, its quality may be low due to the degree of contamination of the water.
The Method for Adding Clean Water is as Follows:
- For a small-capacity air conditioner with a cooling capacity of fewer than 5 tons, it is best not to add additional water. The more you add the more difficult it may be for the heat exchanger to evaporate it. Water leakage caused by water contact with the heat exchanger may result in serious damage.
- For a large-capacity air conditioner, it is best to add water according to this method: start the machine and turn on the fan at full capacity for about 10 minutes before starting normal operation, so that most of the water in the heat exchanger is evaporated into steam, and then add cold water to the desired capacity. It’s not advised to turn on the cooling function at this time.
- After adding water, keep an eye on the temperature of the outlet air of the device for 30 minutes before starting normal operation. If there are sudden increases in temperature, it may be caused by water leakage. If the temperature does not rise abnormally in 30 minutes, you can start normal operation
- Keep an eye on the device after starting normal operation for about 10 minutes. If there is no problem with the device during this period if, then continue to operate normally, otherwise, stop the device and turn off the electricity supply immediately.
- After stopping the machine, check if there is water leakage in the heat exchanger. If it is safe for use, add water according to the above method and restart it after 10 minutes.
- When adding water, add more cold water rather than adding hot or warm water.
- After adding water, restart the machine to check if it can operate normally.
Where Can I Use the Water from My Air Conditioning Unit?
In the air conditioning unit, as long as the water is not more than a certain temperature, it can be used again without any problems. However, if there is some dirt mixed in the water or the water has been standing for a long time, then it would have a negative effect on the quality of our lives and work.
The temperature of the water varies with different types of air conditioning units. For example, in the summer, while we are using our air-conditioning unit and some cold water falls into it, it may be added to the cold water and then drained after use. However, it is best not to add any additives such as electricity or detergents.
How to Remove Harmful Substances from Water?
Water treatment equipment generally includes sediment filters, centrifugal separators and so on. After passing through these stages according to their brand’s different manufacturers with brands own development means expect to obtain pure water.
The choice of equipment according to actual needs and processing capabilities required by production operations such as large-scale purification requirements companies may choose the suitable equipment for separation requirements.
Should my AC drain pipe be dripping water?
After using the air conditioning unit for a long time, you may find that there is water coming out of the drainage pipe and the water leaks all over the ground. This may occur because
- The drain pit doesn’t have enough depth,
- The surface of the soil has become waterlogged due to inadequate drainage,
- There is seepage caused by improper installation of piping.
In addition, if the drainpipe does not work properly or water collects inside it, then it may flow back into the AC device through its drainage outlet and cause leakage. It’s best to select an AC brand with high quality and effective drainage system.
Air Conditioner Leaking Water Inside
There are several main reasons for excess water leaking, or water dripping, inside the room when using the central air conditioning system.
Clogged Condensate Drain Line
The hole in the condensate drain pipe is blocked, so that water accumulates over time and slowly leaks into the room. This can be solved by cleaning or replacing the condensate drain pipe with a new one.
Loose Pipe Joints
Pipe joint components are not tight enough, which causes slow leakage of water in some places. This can be solved by tightening all joints to stop leakage problems in the long term
Bad Insulation Around Air Conditioner Condensation Piping
Improper insulation around AC piping causes this problem, which can be solved by improving insulation or sealing around where there is perforation and other improper insulation measures to prevent heat loss and condensation buildup.