Standard Shower Size Australia

shower sizes australia

A shower area is a place that you can use to take a shower and the term is predominantly seen in Australia. Shower space is the area in which someone can stand and take a shower. Sometimes the shower space is located in a bathroom but also often enough it is set up outside of one. Showers are common at beaches, on construction sites and on camping fields. It usually includes some kind of small building, sometimes even more substantially sized with walls or a roof. The area can be supplied with electricity to heat the water beforehand or allow additionally heating afterwards.

The shower area is usually very small, reasoning the term ‘standard’. It may be built to allow one person to take a shower at a time. This can be because of space or stand restrictions but it may also be an idea to limit the number of people taking showers in one place. This limits problems like the growth of bacteria in an area where lots of occupants shower in a short period of time, like after a beach day.

Different countries have different requirements for a standard shower size, Australia however, has a minimum size of a shower which is around 750mm depth and up to 1200mm width.

Double Shower Size

In some cases, double shower areas are required. This is a larger area within a room that allows two users to shower at the same time. They can be installed as an extra on top of a normal-sized shower room or they may have their own entrance and space to leave their toiletries etc. The shower door width is still usually for just one person.

The minimum dimensions size for a double shower area is 2.000 mm long, 1.400 mm deep and 1400mm high with a minimum clear floor space of 2×1 meters.

Shower Dimensions Australia

The dimensions of average Australian bathroom dimensions include height, width, length (or depth), and water storage capacity (volume). Water capacity refers to the volume of water that can be stored in the shower before it begins to leak out. Volume is measured in litres, litres or gallons (the American gallon has subunits). A bathroom could have at least 1.5 “of total storage capacity for every occupant”, meaning, if you live alone then your bathtub/shower needs to hold at least 1.5 litres, 2.0 litres if you have a family of two and 3 litres for a full house.

Double Shower Dimensions

These are not commonly installed, but they are available for those who wish to add one although there is no requirement from building regulations or standards to have one fitted. Just make sure your bathroom dimensions may be able to fit shower sizes such as this one.

Shower Recess Sizes

A shower recess is a smaller version of a normal-sized shower and often has no door. They are sometimes used as the only bathroom on a campsite or as part of an outdoor shower facility.

The size for these showers is measured differently from the others mentioned here, as they do not involve standing upright inside them, they are generally squatter. A shower recess is usually at least around 30 x 30cm.

Double Shower Dimensions Australia

A double shower area is the same as a single but it has enough space for two people to stand in and shower at one time. There are several different designs of these available, including some that have a door to allow more privacy than an open-plan design would do.

The minimum size for this type of shower room is 2 metres long, 1.2 metres deep and up to 2 meters high with a minimum clear floor space of 2×0.75m, although this is measured inside the shower area itself rather than the whole room as a bathroom would be.

Standard Shower Size

Shower doors could be made from heavy-duty commercial-grade glass with a thickness of 8mm minimum. It is important to consider the weight and size as it needs to support the water pressure and take into account that it can sometimes swing open or close forcefully. Shower screens are also available which only require an opening at the base of the screen which is fitted to create a seal at the bottom.

shower sizes australia
Bathroom Shower-Example

Walk-in Shower Dimensions Australia

The standard shower has about 80 by 80cm of floor space. A walk-in shower needs to be larger, that’s why it’s around 800mm wide and deep. The area may have a bench so that people can take their time when they are washing. It must fit within your bathroom dimensions.

Shower Size

Showers come fully plumbed with easy clean nozzles, they are angled to prevent water pooling in order to easily channel it into the drain system. They do not require any additional maintenance than an occasional wipe over. They can be installed on many different walls and surfaces that may help give your bathroom its own unique design. Shower controls could be set up on either side of the shower or behind a glass screen in order for them to remain accessible for everyone who uses the shower room but also discreet if required. The minimum height from ground level to the bottom of the showerhead outlet may be 1.800 m above the floor level minimum, this could be different depending on where the shower is installed.

Minimum Size for Walk-in Shower Australia

If you are installing showers on your property, or shower tray, make sure you know the dimensions, exact size requirements and design ideas, before digging or building walls etc. Codes vary from state to state and may also depend on how many occupants use the shower. It is important to make sure that no water leaks may occur and also that it is not in a location where anyone can walk into and get injured. It’s important to have room for different fixture sizes, showerheads, towel rails that may fit in your bathroom design, so get your dimensions right.

Shower Sizes Australia

Shower water volume is measured in litres or gallons. This could be at least 1.5 litres for every occupant for a standard shower installation. A family of 2 would therefore require 3 litres, while a full house would need 5.5-6 litres minimum. The size of your shower depends on how many occupants. The showerhead could be firmly attached to the wall and have a swivel function so that it can be moved from left to right for everyone.

Minimum Shower Size Australia

As a general rule, all shower compartments in Australia may have a minimum floor area of 2.5m2 and 1.35m for their height. They could accommodate the required water pressure and volume for at least 30 seconds when turned on full, which is achieved by doubling the standard 8 litres per minute flow rate to 16 litres per minute at 1 bar of water pressure.

Average Shower Size

The best way to measure your shower needs is to determine how many people may use it and how long they may spend using it. You can then work out the litres needed, depending on if you are working with a standard or walk-in shower. Knowing all of this information allows you to make sure that you may meet local council regulations for water usage and safety.

Shower Sizes

Nowadays, people are becoming more health-conscious. Thus, it is not surprising to witness the increasing demand for green home decorations. Walk-in showers are one way of providing green bathroom solutions for your home or common area. Adopting walk-in showers in high rise buildings may mean less water wastage and also a more efficient use of water. Moreover, a walk-in shower offers users a convenient time for privacy and exercise.

Shower Dimensions

Walk-in showers could have a minimum bench space of 0.4m by 0.7m, although it is recommended that you leave around 1 metre to provide comfortable room for bathers as the flooring needs to be tiled. The bench may be non slip and easily cleanable to avoid any accidents. It could be the same height as the shower or slightly lower, but not higher than it by more than 10cm.

Shower Width

Walk-in showers are actually not new to the industry, however, what is relatively new is the rise of popularity among homeowners and individuals who want to renovate their homes. They add a contemporary stylish look to any setting for sure. As mentioned earlier, walk-in showers are actually not new, however, what may be relatively new is the increasing demand for green home decorations among various people who want to renovate their homes or common areas as a way of providing green bathroom solutions. In fact, installing walk-in showers are actually not just efficient but also economical. It helps save water, thus cutting down on utility costs and making it environment friendly.

Walk-in Shower Dimensions

As well as knowing the size of your walk-in shower room, other factors may be taken into consideration before installation such as, whether there is enough space around the shower, the type of plumbing system available and what type of budget you have to work with.

Standard Shower Size Dimensions

If walking into the shower is difficult for any reason such as disability or obesity it can be made easier by lowering the floor level by around 50mm using a riser kit which may add extra depth when entering and exiting. There are many types of benches that can be used in order to provide comfort and safety during use. Backrests and high seats help to keep bathers comfortable while sitting in their showers or baths for longer periods of time. Sliding trays come in a range of shapes and sizes so they can fit around your existing toilet cistern if required without blocking surrounding areas. They also come with non-slip mats to provide extra grip for standing bathers.

Minimum Shower Size

Walk-in showers with seats can be fixed to the wall with either high or low brackets, depending on your needs and requirements. If you are unable to transfer from a wheelchair into the shower you may require an alternative type of walk-in shower such as one that can fold away so it is out of the way when not in use. These types of showers also come with hinged doors making them easier to access than traditional shower enclosures

Standard Shower Dimensions

There are many factors that go into choosing the right size for your new bathroom enclosure, but looking at factors like what may be used most often is important before purchasing a new shower in Australia.

Shower measurements can vary from a small corner unit to a large enclosure that offers multiple spray settings and has a bench in the middle for comfort when bathing. The standard size of an Australian shower is around 1 meter by 1 meter, but if you have the space then go for something larger.

Walk-in Shower Screens

Walk-in shower screens aren’t exactly new, however, they are becoming increasingly popular for a number of reasons. While they may look similar to standard showers at first glance, walk-in showers come with hinged doors that swing open giving users an unobstructed view of the rest of the bathroom. Walk-in showers allow you to take a shower without the risk of slipping and falling. They also prevent water from splashing around and making your bathroom floor slippery and dangerous to enter.

Walk-in shower screens come in a variety of different styles, sizes, designs and prices. Installing one is relatively simple as most may come with detailed installation instructions for you to follow. Installing more stylish walk-in shower screens is also relatively easy as all you have to do is measure the opening of the doorway, choose a screen that best suits your style and needs and then follow the installation instructions provided with your specific product.

And just like a standard shower, they come in different shapes and sizes so you can choose one that fits perfectly into your bathroom space.

Mobility within Different Bathroom Layouts

Walk-in showers are also ideal for people who find it difficult to enter the shower due to health issues or disabilities.

Some people require a walk-in shower because of problems with their legs and feet, which makes standing for long periods difficult. For older people and those with disabilities getting into and out of your standard shower can be particularly problematic as they often have to step over the side of a small enclosure. This is why walk-in showers offer such an advantage as they give bathers space to move around and sit down before entering or exiting the shower itself.

One thing that may be considered when looking at different shower sizes is whether you’re able to transfer from a wheelchair, if not then you need to take this into consideration before you buy. All walk-in showers have a seat installed within the shower, this makes it easier for those with mobility problems to enter and exit the shower without risk of slipping.

Another thing you need to consider is whether your chosen design has an auto-close door, or if you may require a handle or push bar on the outside so it can be opened easily by someone who is unable to hold onto something while transferring from a wheelchair.

Walk-in showers are also available in all shapes and sizes so they are suitable for all different types of bathrooms layouts. This means that no matter what shape your bathroom is or how many doors there are into it, you can get one that suits you perfectly. The only real limiting factor here is space because just like a standard shower enclosure, they all have a square or rectangular shape that may fit your bathroom dimensions.

Related Bathroom Renovation Resources