Underfloor Heating Cost

Underfloor Heating Cost

Many people are surprised to find out that you can use underfloor heating in your bathroom and throughout your entire home. This is a great choice since it provides both warmth and comfort, not to mention the added benefit of making your experience at home more enjoyable. Underfloor heating is a kind and efficient technique to keep your house warm. The heat spreads out continuously from the ground, rising gradually. It may not be suitable for every space, but it might be perfect for certain parts of the house, such as the bathroom, which is a more confined space and where you don’t want to suffer a chilly shock

However, installing underfloor heating may cost you considerably more than traditional flooring options like vinyl or tile. Expect underfloor heating to set you back around:

  • The cost of an in-slab electric underfloor heating system is around $33 per square metre
  • A hydronic in-slab underfloor heating system costs around $70 per square meter.
  • The typical cost of a hydronic in-screed underfloor heating system ranges from $95 to $110 per square metre.

Read on to find out more information on the technicalities of installing underfloor heating, as well as more specifics on pricing.

What is Underfloor Heating?

Underfloor heating refers to pipes, usually made from plastic or metal, that is installed on the floor under ceramic tiles. They are connected to a heating system which is typically an electric heater or a boiler. Underfloor heating systems work by warming up water that moves through tubing that’s located underneath tiles. This method of heating offers several benefits including even heating and a feeling of comfort, as well as the fact that you don’t have to worry about dust bunnies forming under your floor if it’s carpeted.

How does Underfloor Heating Work?

There are basically three types of installation techniques used in underfloor heating:

  • radiant heat
  • hydronic heat
  • electric heat

In each case they operate on the same principle, water runs through tubing placed underneath tiles, warming up as it flows.

Radiant Heat and Radiant Heating System

Radiating from a warm source is called radiant energy. It is transmitted by electromagnetic waves with wavelengths longer than those found in visible light. These waves carry a large amount of energy and can be produced by many different sources including IR heating elements, UV lamps, incandescent lights and more. A radiant heating system doesn’t make use of air or gravity. Instead, it is powered by electricity or hydronic heat.

Radiant heating works on the principle that objects emit infrared radiation when they are warmed up which can then be absorbed by other surfaces. When installed correctly underneath tiles, for example, the radiant energy then travels through the material until it reaches an obstacle such as a wall or window where it is reflected back into your room before being absorbed again This process of heating can take some time to start so this type of underfloor heating may not be suitable if you need to warm up your home quickly.

Electric Underfloor Heating System

This is a popular and cost-effective method of heating and it’s easy to install. A thermostat and an electric mat beneath your tiles create heat which rises to spread throughout the room. The electric mats are manufactured from plastic, rubber or carpet. It might not provide instant warmth because it takes time for the electricity that powers these mats to get warm enough. However, once it reaches this temperature, you’ll soon feel the warmth underneath your feet.

Hydronic Underfloor Heating System

Hydronic uses pipes installed in a screed material instead of tiles. These systems can be used with either hot water or anti-freeze fluid (which is cheaper) and they transfer their heat through convection, warm fluid rises and cooler fluid sinks. They also emit radiant heat because of the piping itself and they transfer heat fast.

Hydronic heating systems typically use a boiler for instant hot water. The pipework is installed inside or hidden behind your flooring so it’s not as noticeable as electric mats. You might need to hire a professional to come and install hydronic heating systems as it requires more work. This method of underfloor heating is perfect for those who want instant warmth but don’t want the inconvenience that installing mats can bring.

Cost of Underfloor Heating Australia

There are several factors to consider while researching underfloor heating systems. The expense of installing heated floors, as well as the type of flooring material utilized, are examples of topics that need to be addressed. In Australia, the typical cost of laying a heated floor is between $30 and $115 per square meter.

Because it necessitates plumbing, an underfloor heating installation is distinct from other heating systems. To work with plumbing, electricity, and heat, the contractor needs to be skilled. The cost of hydronic heating installation varies by region. Labourer costs in Australia typically range between $25 and $30 per hour. Here are some typical labour prices in various parts of the country.

Heated Floor Cost

When trying to determine the underfloor heating cost, Installer costs may range widely based on the kind of system you pick and whether it’s retrofitted or constructed during a build. With this in mind, you may anticipate hydronic heating to cost anywhere from:

  • For an in-slab underfloor heating system (excludes boiler), expect to pay $68 per square meter.
  • For an in-screed underfloor heating system (excludes boiler), expect to pay between $105 and $230 per square metre
Underfloor Heating Cost
Manifold for Underfloor Heating System

Generally, some underfloor heating cost may be greater for under tile and carpet heaters than those in screed or slab heaters. The cost of a square meter depends on the heater’s size and type. For example:

  • The most affordable screed electric heater is $114 incl GST, bearing in mind that it’s for spaces less than 1 square metre (for areas under 1 m2).
  • The least expensive but largest in-slab electric heater is less than $33 per square meter.

A fully programmable digital floor sensing thermostat costs around $200 in terms of a thermostat.

Underfloor Bathroom Heating Cost

The next thing to consider is how much your underfloor heating may cost to operate. The size of your installation, the temperature you run the system at, and whether or not you use it at off-peak or normal power rates all influence how much your system costs to run. Hydronic floor heating, in terms of upfront expenditures, is generally the most expensive, but it is also more cost-effective than radiant floor systems when used appropriately.

  • A modest under-carpet heater may cost as much as $24 per month to operate, based on a rate of 26 cents per kilowatt-hour (for up to 3 square meters).
  • Given a typical tariff of 18 cents per hour, you may expect to pay approximately $50 for a small 4 square meter bathroom.
  • A large under-carpet heater consumes roughly $100 per month in running costs (15 square meters to 20 square meters).

Using renewable energy to power your home means that you’ll be saving money on your regular electricity bills.

Underfloor Kitchen Heating Cost

The simplest underfloor heating system to install. A very thin mat is installed directly beneath tile or carpet, and it serves as the heating unit. Installing a larger system, or one where the floor might get wet, such as a bathroom or kitchen, could be done by a professional.

The correct type of underfloor heating for your home is determined by a variety of criteria, as demonstrated above. If you want to install underfloor heating on an existing house, especially one that is compact or just add it to a single room, such as the kitchen or bathroom, electricity. If you’re searching for a complete home heating system for your new house, hydronic underfloor heating might be more expensive upfront but may save you money over time.

Underloof heating cost for a kitchen as stated, there are several different types of underfloor heating systems and installation methods. The cost of installing underfloor heating may vary depending on the type of system and how you want it installed.

Underfloor Heating Cost for a Kitchen

In general, though, the expense of underfloor heating may be expensive:

  • Electric in-slab underfloor heating costs approximately $30 per square meter.
  • In-slab hydronic in-slab underfloor heating costs $70 per square meter.
  • In-screed hydronic underfloor heating is typical $100 per square meter.

It’s essential to think about other elements that might influence the price. Underfloor heating installation requires particular attention since you want your heating system not only to work efficiently but also to warm up your home as quickly as feasible. Inadequate insulation allows heat to escape around the edges and under your floor, resulting in lesser warmth and higher energy costs.

How Much is Underfloor Heating

There are many factors that may affect the underfloor heating systems cost, such as

  • Area size
  • Number of zones

The cost of an underfloor heating system may be determined by a number of factors, including the size of the space where you want it. Because more materials are required for a larger area, the bigger it is, the longer it may take to finish and increase labour costs. Expect that a heated floor in a bathroom may be less expensive than a heated floor in a living room.

The installation of an underfloor heating system necessitates the use of a room thermostat. A thermostat allows you to adjust heat outputs such as a heating mat, a heated floor mat, or a ceramic tile heater. In underfloor heating systems, a heated tile floor thermostat allows you to regulate the temperature in one room.

Underfloor Heating Systems Benefits

There are many benefits to having a professional underfloor heating installation done, such as:

  • It allows you to customize and renovate your home more readily.
  • Running costs are lower than with other forms of house heating.
  • It reduces the spread of allergies, dust and grime.
  • Heat pumps are nearly as quiet as electric heating systems because they convert heat to cold air.
  • Other types of heaters may get hot enough to burn tiny hands, but this one doesn’t. Because it’s not as hot as other heating systems, fingers may not be harmed.

Negative Sides of Having an Underfloor Heating Installation Done

Everything has cons, and underfloor heating is one of them. Some of the major cons of underfloor heating are:

  • The initial investment may be expensive.
  • It might be time-consuming or inconvenient to make any changes.
  • It’s difficult to change something once it’s in place.
  • Is more difficult to warm up than other home heating technologies.

Electric Floor Heating vs Hydronic Underfloor Heating Systems

As stated above, there are two main types of underfloor heating, electric floor heating and hydronic floor heating.

Electric underfloor heating is less expensive than hydronic. An electric underfloor heating system may be installed in your floorboards to warm up the entire ground. This type of house heating is cheaper and is useful for smaller rooms such as bathrooms or kitchens that need a simple renovation touch. You can easily add an electric in-slab heater underneath tiles and it is cheaper than other types of systems with one wire per square metre needed for installation, which means you can manage the costs when renovating your home on a budget.

Hydronic underfloor heating makes use of warm water or antifreeze to heat your floors and may likely be set up by a professional. Hydronic underfloor heating systems are more efficient than electric heating, but they need to be installed properly before you can have your home heated with them. Like electric heaters, hydronic systems are cost-efficient and energy-efficient, however, there is the initial investment of having these prepared for your home which might not be in your budget initially.

Overall it all comes down to the final underfloor heating cost and how experiences your underfloor heating installer is. Expect to pay around $100 per square metre for both materials and labour costs for professionals to install underfloor heating in your home. Underfloor heating installation cost can be reduced by doing some site preparation and getting multiple quotes from different contractors, but on average the biggest cost is the underfloor heating system cost.

Related Flooring Resources

Flooring Quotes

If you’ve been looking for new flooring for a while and have recently been bombarded with sales pitches, you may be perplexed. When flooring companies start promising you the benefits of floating floors, it’s only natural that you’re doubtful. Here at Specifier, you can make an educated decision.


Floorer Call Out Fee

You know you need new flooring, but you don’t know how much it may cost. The good news is that regardless of your budget, there are lots of beautiful, long-lasting flooring options available to you. Read about it…


Hydronic Heating Cost

Hydronic heating is increasingly popular in Australia as the running expenses are up to 40% lower than ducted heating or underfloor heating. Read more…


Underfloor Hydronic Heating Prices

Because hydronic heating systems operate on water, they are more energy-efficient than other types of heaters. Read more…