Driveway demolition is the act of removing concrete, asphalt, or other material from the driveway to make it level with the ground. It’s typically done when there’s too much snow or ice on the driveway to use a shovel. It’s also done to replace the driveway with one that better fits the home’s style.
Driveway demolition is a large job, but if your only option is to remove it then go for it. It can be very dangerous though if you don’t do it properly. You should always follow safety guidelines and wear protective equipment because the concrete from a concrete driveway will have sharp edges after being removed. If you have someone helping you make sure they are using all proper equipment as well so nobody gets hurt by flying debris from the concrete removal.
You may want to consider hiring a professional for the concrete driveway removal unless you’re extremely handy or just really brave. After all, why risk injury when you don’t have to? There are many places online where you can find a contractor to come to remove your concrete driveway.
Before you do anything, figure out where you want the new driveway. If it’s right next to another property you’ll need to take that into consideration. Doing this type of work in a sloped fashion is very easy so you have some flexibility when placing it. Once everything is planned properly, call the contractors and get things started.
Driveway Demolition Cost
The cost to remove concrete is a very common question and one that is hard to answer. If you’re hiring someone to do concrete removal for you then they will be able to give you a solid cost to remove. However, it doesn’t always have to be asphalt or concrete removal as there are many other services that may need to happen first.
If you plan on removing the driveway yourself, you’ll have an easier time projecting the cost to remove ahead of time. This all depends on how large your driveway is and if there are any additional materials involved such as water pipes or drainage systems that might need adjustment. This demolition process could also expose these items which would mean extra labour fees afterwards if not handled properly beforehand, so, extra hidden cost to remove.
So, it’s really tough to pin down the exact driveway removal cost. If you’re looking for an estimate that is more precise, then hiring professionals is your best bet. This will ensure everything goes smoothly and you can go ahead with the new driveway installation afterwards knowing it was done properly.
Sometimes demolition of a driveway doesn’t have to be too bad if there aren’t any obstacles or unnecessary materials involved. You should always consider calling in professionals though if the project seems too big, especially if it involves water lines or other utilities. If you’re doing this yourself be sure to wear proper safety equipment and keep all debris safely piled up so nobody gets hurt during clean up.
How Much to Demolish a Driveway
That will all depend on what type of driveway you have, and how much work has to be done. If the surface is flat then it shouldn’t take too long at all to remove. However, if there are any obstacles such as water pipes or other utilities that need to be moved then the process could become more difficult and time-consuming.
If you plan on hiring a company to do this task for you, make sure to call around and get quotes from multiple companies. This way you can see who’s offering the best price while still maintaining great quality workmanship. When getting these estimates make sure they include everything you’ll need along with their price quote so you know exactly what will be taking place throughout the day. If you don’t mind doing the job yourself, then it won’t cost anything to get estimates from different companies. Just be sure you have a plan of attack and everything will go smoothly when the big day arrives.
Once completed, a new driveway can be a perfect way to elevate your home value while also making it easier for your guests to park in front of your residence. If you’re considering doing this type of work yourself beware that it’s not always as simple as removing concrete or asphalt since there could be various utilities such as drainage pipes and such which must be relocated first. Always hire professionals if you don’t feel like doing any difficult tasks such as excavation with heavy machinery because proper safety procedures must be adhered to. The average cost in Australia to remove a driveway is $100 per square metre for asphalt and $120 per square metre for concrete driveway, more if the concrete is reinforced. The cost to remove concrete will change depending on the city or state you live in, but it’s a safe estimation for most places.
Cost to Remove Concrete Driveway
That really depends on the type of concrete driveway you have, and how much work has to be done. Generally, asphalt removal is easier than concrete removal because it’s softer which means it doesn’t take as much effort or equipment to chip away at it. This will all depend on the amount of space you need for your new project, so this must always be taken into consideration before anything else.
In Australia, concrete removal will cost you around $100 per m2 on average. It’s always best to get multiple estimates when doing any concrete removal so you can have a clear understanding of what will take place, and who’s willing to offer the best results and what the cost to remove concrete is.
If you plan on doing the concrete removal yourself, then you can expect it to take a lot of time and effort. The removal cost to remove concrete is usually not worth the effort to do it yourself. Always wear proper safety equipment when handling heavy machinery so nobody gets hurt. Also, be careful about how much debris you’re creating during this process because it will need to be cleaned up afterwards and this increases the average cost for the old concrete.
The Concrete Driveway Removal Process
The concrete driveway removal process will depend on where you live, and what type of concrete removal you need. Always make sure you get a quote from multiple companies before thinking of concrete removal, so you’ll know exactly how much money it will cost. If the concrete is reinforced or it’s just old concrete, this could make it harder to remove which will require extra work.
If you plan on hiring a company to do the concrete removal process for you, then call around to get multiple quotes so you can compare the cost to remove and check the quality of workmanship. Most companies that offer concrete removal services have all the necessary equipment needed for getting the job done, but a cheaper removal cost may be found if you hire a smaller company with limited resources to remove a concrete driveway. If that’s the case, then make sure to take safety precautions and beware of how much debris is created during this process because it will need to be cleaned up once completed after it dries out.
Once all is done and ready for new concrete or asphalt, you can expect your driveway to last a long time. If you plan on doing the work yourself, then make sure to get all your tools and safety gear together before starting this process because it will be lengthy.
Concrete Removal: Step by Step
Before you start to remove a concrete driveway, the first thing you need to do is try and find any underground utilities that may be present where you’re planning on removing the old driveway, then move them elsewhere temporarily. An excavator typically does this for you but if there are lots of pipes or wires then it’s best to call a professional with experience in this area.
Once all the utilities have been moved, the next step is excavation. Depending on what type of driveway it is will determine how much effort needs to go into tearing up the surface first. This can have an increased removal cost. If it’s asphalt, then using an industrial steam machine can make it fairly easy to work. These machines actually turn the asphalt into molten liquid in a matter of seconds which means no mess, dust or debris afterwards. Once everything has cooled down, this type of machine can even smooth out the surface to make it ready for tarring.
Concrete is usually much thicker and harder to remove. If you hire professionals they’ll usually have a special attachment for demolition that can break up a concrete driveway into chunks which are then loaded into the back of a truck. Once all the concrete pieces have been removed, you’re left with an empty space where your new driveway will be installed.
How to Demolish a Driveway
If you’re doing the concrete driveway removal work yourself, then renting heavy machinery such as an excavator might be necessary depending on how large your concrete driveway is. Keep in mind that removing a concrete driveway yourself might have a hidden cost to remove concrete plus it may not be allowed under your local building code so always check with the local planning and building regulation office in your state. Always ensure safety gear is worn at all times because there could be sharp objects nearby or any other dangerous materials present before anything gets started. This project should only take a few days to complete if everything goes smoothly.
Once you’ve made a decision on whether or not to remove your concrete driveway yourself, the process will begin by getting the necessary equipment together. You can find all of this equipment at any rental store near where you live. It’s best to only rent from those that have been inspected and approved as safe as possible for use as they could cause injury otherwise.
Once you get your rental equipment, it’s important to read all their safety guidelines and information to understand how they work so nobody gets hurt. Then, start the process by removing all cones or any other items used for blocking off parts of your driveway because after this process is done there will be a lot of debris and you don’t want anyone getting in the way.
Place heavy-duty plastic sheeting across the entire area that needs removing for protection while taking into account where power lines may lie underneath which could kill people if not handled properly while working with heavy machinery. Go over each section twice before doing anything else because this ensures everything has been blocked off to avoid accidents from happening later on during the removal process. Once all is secure, you can begin the process by using a jackhammer for removing concrete.
Jack Hammering Concrete
Once you’ve decided to use a jackhammer to remove your concrete driveway yourself, then you’ll need to locate all power lines that may be underneath and tape them off with heavy-duty plastic before beginning this process. Make sure everything is safe and secure because once the jackhammering begins there will be dust flying everywhere which could potentially cause danger if not handled properly. Once done, start at one end and work your way down slowly as possible until finished, but make sure to take breaks throughout this whole process as well as wear safety gear. Be careful not to step on any wires or anything underfoot because this could be fatal.
After the removal process is complete, make sure everything is cleaned up and all debris has been removed. Once that’s done the driveway should be patched with asphalt or concrete for easier access of your vehicle to get in and out of your property without having to worry about any wires underfoot.
What to Do After a Driveway Removal?
Now that your new driveway is ready to be installed, you’re ready for some fresh asphalt or concrete which will give it the same look as professionally laid tar or cement. This step can be done by yourself or you can hire someone else to do the work for you depending on how skilled of a person you are with tools and heavy machinery like this. The average cost in Australia to lay concrete is $4 per square metre while laying asphalt is usually around $3 per square metre. These prices again depend on the city where you live so get quotes from multiple companies before making any decisions on who to hire.
Concrete Removal Conclusion
If you’re on a budget then it simply makes no sense to remove concrete yourself because it takes a very long time to do which means paying more money. Contractors usually charge a lot which could add up even higher depending on how large your driveway actually is. If you have a small driveway this won’t take as long, therefore, saving you money in the end, but if it’s larger than average, then expect to pay more for this service.
Although removing concrete yourself can seem like an easy task for saving money, it’s best to hire someone else who knows what they are doing instead even if it costs a little bit more because their experience should reduce any potential risks during this process.