What is a Tempering Valve?

tempering valve

Different types of tempering valves | How does a tempering valve work? | Tempering valve installation | How to adjust tempering valve? | What is the temperature of a tempering valve in Australia? | How much money can tempering valves save you? | Does a hot water system impact a tempering valve? | Tempering valve vs mixing valve | Tempering valve vs TMV valve in Australia | How long does a tempering valve last? | What is a tempering valve in a hot water system?

A tempering valve is a valve that releases water at the desired temperature of each shower. This is a very efficient valve in saving hot water usage and also makes showers more enjoyable.

This type of valve is being used in places where many people take showers simultaneously such as hotels, apartments, commercial buildings etc… In these places, the problems or inconveniences caused by simultaneous use of water becomes severe and even dangerous when it comes to bathrooms with low wet areas.

For this reason, tempering valves were invented so that we could have warm showers without worrying about these problems.

Tempering valves basically have a thermostatic element that is installed in the line of hot water. This element has a setting from 0-100 degrees centigrade and it functions by stopping the flow of hot water when the set temperature is reached. However, as soon as this temperature drops it starts releasing warm water again. The best thing about this type of valve is that they are easy to install because no additional wiring or pipes are needed to be installed. These valves can also work together with other types of water tempering devices such as mixing valves and mixing faucets.

Different Types of Tempering Valves

Nowadays, there exist three different types of tempering valves:

On-Off Valve With Thermostat: This type releases cold water only until the desired temperature is reached and then stops the flow of water. Then, as soon as this temperature drops again it releases warm water to make sure that the desired temperature is maintained throughout. These types work in a similar way with automatic faucets but they have an additional control so that users can use them to get hot or cold water at any time without having to wait until the desired temperature is attained.

Toilets/Bidets With Thermostat: Some toilet and bidet models are equipped with tempering valves too because they provide added comfort when using these devices. As you probably already know, most people find it difficult or uncomfortable to use these devices when the water is either too hot or too cold. Toilet and bidet tempering valves offer a warm water temperature and also include an infrared sensor that recognizes when the person is sitting on the toilet or bidet. Once this happens, they start releasing warm water for comfortable use.

Hot Water (Shower) Mixing Valve: This type of valve mixes cold water together with hot water to attain the desired showering comfort level. They work by keeping the tempering valve in a closed position so that no hot water comes out until it reaches the desired temperature while at the same time allowing cold water to enter. This makes sure that users are still able to enjoy their showers even if there isn’t much hot water available. When you have this valve installed in your house, all you need to do is to turn on both taps of hot and cold water at the same time to get warm showers.

It is advisable that before installing this type of valve you first check with your local building authority for the precise rules and regulations on how many of them should be used in a certain area. Usually, it is not allowed to install these valves in houses but they can be used in apartments and commercial buildings instead. As we mentioned above, these valves are very efficient when it comes to saving energy and water as long as they are installed properly. This means that you should contact a professional plumber who has experience with tempering valves so that he installs them according to their specifications.

How Does a Tempering Valve Work?

Before they entered the market, people used to have problems getting warm showers because their hot water heaters couldn’t produce enough hot water when needed. In fact, there is a common situation in which one has plenty of hot water at night time but during the day or evening, this amount drops significantly and then there is barely any left for taking a shower.

This happens because heat exchangers usually only work well between 6-8 am in morning. During this time they put out considerably higher amounts of energy compared to other times of the day. However, after these hours it gets harder for them to maintain high pressure so that most people need to wait until later in the afternoon before they can get another healthy shower.

All these problems would be solved if we installed tempering valves since they allow users to adjust the temperature of water depending on their comfort requirements.

This is done by mixing hot and cold water when taking a shower or doing other activities that require warm water such as washing dishes, bathing pets and so on. This way there will be always enough warm water available even during peak hours and energy would not be wasted while at the same time reducing your bill.\

Tempering Valve Installation

Installing one of these devices can also help you save money because it is capable of cutting down your energy consumption rate so that you only use what you need without wasting too much. For instance, when using a classic shower head it takes around 200 litres each minute to produce just five gallons of heated water but with a mixing

Problems from faulty valves include:

  • slipping from wet floors
  • electric shock through contact with exposed wires
  • bursting pipes due to excess pressure
  • getting sick (especially for those who are vulnerable)
  • wasting energy through running too much cold water

How to Adjust Tempering Valve?

As a rule of thumb, you should always talk to an expert before attempting to install any type of this device. They will be able to tell you if it’s possible for you to do it yourself or if there are certain requirements that must be fulfilled.

For example, they may warn you about specific rules and laws in your country regarding how many mixing valves can be installed per house. You may also need special valves depending on the amount of water available in your home (for domestic use) but not for industrial buildings which usually have larger amounts of hot water. For example, hotels and hospitals with large facilities require more valves in order to assure that most people get enough warm water at all times. Some countries even require installation permits from authorities so that they make sure that only qualified people deal with these valves.

What is the Temperature of a Tempering Valve in Australia?

The temperature of a tempering valve in Australia is the temperature of the water that comes out of it (in terms of degrees Celsius). This is used by people to know the exact temperature they require for their shower or other warm activities whenever a tempering valve is being used.

Instead of relying on your hot water heater to provide you with a certain amount of heated water, tempering valves allow users to adjust the temperature so that they get exactly what they need in order to feel comfortable.

The standard three way mixing valves can produce either very cold or very hot water but not warm enough for everybody’s needs. Tempering valves usually come with different temperatures and this means that there is one best for everyone regardless if he/she wants warmer or colder showers each time.

Even though these devices were designed to save money and energy, the amount of savings achieved will depend on how much hot water you normally use. For instance, if your family only uses large amounts of hot water during peak hours then it’s highly unlikely that tempering valves can lower energy consumption significantly.

However, if most people in your home take long showers or they run other sanitary appliances such as washing machines or dishwashers while taking a shower then there is a good chance that installing one of these devices will be extremely beneficial for your household budget and the environment.

How Much Money Can Tempering Valves Save You?

Based on historic figures from 2012/2013, the average Australian household spent around $200 each year to keep their water heating system working properly which means that saving just 15% off this amount can save you around $30 per year.

Tempering valves are also useful for a variety of other tasks such as conserving energy in any building, preventing overflowing because hot water is too hot and by regulating the temperature in large buildings with several rooms (hotels and hospitals). These valves are generally used to ensure that people get the exact temperature they need without wasting energy or money unnecessarily.

How to buy a tempering valve? The first thing you have to do before purchasing one of these devices is determining what size (diameter) will be perfect for your needs and if you really need one at all; this depends on how many bathrooms there are in your house, how much water is stored as well as the amount of cold water you need.

It may not be worth buying one of these valves if you don’t use large amounts of hot water every time or use your shower a lot; once the hot water arrives to your home then it’s always available for you and nobody can control how much you are going to consume.

Before thinking about installing such a device, think carefully on whether this is really something that’s useful for you and if it will save as much energy as hoped in the long run.

Shower timers or restrictors should also be installed when tempering valves are being used in order to provide better control over output temperatures and prevent people from wasting too much hot water during their showers which can lead to higher bills or even make some users feel due to the higher temperatures.

Does a Hot Water System Impact a Tempering Valve?

The impact of a temperating valve on a hot water system will depend on the frequency of showers taken.

If you take a shower every now and then then this won’t be that much of a problem but if you’re always taking hot baths or using your sink or other sanitary devices then it’s best to reduce your water usage whenever possible since tempering valves can lead to wastage even with restrictors installed; unless users are being very careful when running their appliances, there is a danger that they will waste more energy than expected.

Furthermore, if these devices are not set correctly in terms of temperature and pressure when they are first installed, problems can arise as well which can easily turn into headaches for the homeowner such as scald burns due to too cold water or increased bills because the device was never set up correctly to start with.

In order to avoid such issues, it’s best to learn how these valves work and the amount of hot water with cold that people can actually use at their homes before installing one of these devices as well. Furthermore, if a tempering valve is installed at your home then don’t forget about checking it once every six months or so in order to make sure that everything is going smoothly and according to plan. It’s

also recommended not taking lengthy showers no matter how long the temperator valve will last for but this all depends on what models you buy; choosing the right model could be tricky since there are several low-quality products on the market today which aren’t worth purchasing. Not only do they consume more energy than expected but some models can also take several minutes to work so there’s no point in wasting money on these products; furthermore, their warranty periods are limited and they have a tendency to break down early due to poor quality materials being used.

If you do face any issues with your tempering valves then make sure that you look for an expert technician who will be able to fix any problems without causing further damage or wastage of energy.

Tempering Valve vs Mixing Valve

Mixing valves should not be mixed up with tempering ones since they are two different devices that work in a slightly different manner.

Tempering valves are installed in order to reduce the temperature of hot water as it is being consumed while mixing valves modulate pressure for showers and baths so that there is perfect balance between hot and cold water. This means that these devices will help users save energy and money by keeping their needs balanced at all times.

You can find several of these mixers on the market today which come with several features such as anti-scald types or even electronic versions; although, make sure you buy an original version since most models out there are fake or second hand which isn’t very reliable when it comes to performance.

Tempering Valve vs TMV Valve in Australia

tempering valve

Temperature and mixing valves are two different products that work slightly differently.

Mixing valves are used to modulate pressure in order to balance out hot and cold water with tempering ones, on the other hand, reducing the temperature of hot water so it is always provided at a comfortable level.

Also, these devices can be found in many homes today but if you’re searching for one then make sure you buy one from a trusted source since there are plenty of low quality models out there which aren’t worth your money; also look for products that come with an official warranty as well since this will actually give users

How Long Does a Tempering Valve Last?

Before proceeding to buy a tempering valve, make sure you consider the warranty period and the overall quality of these products; some devices can last for several years but others are made from poor quality materials which break down after just a few days.

Also, testing your tempering valves once every six months will help you figure out just how long they will last in case there are any issues or problems with them. Most models have accurate gauge readings on their dials as well so users can find out if anything is wrong with them; furthermore, many models come with built-in backup batteries which keep the device working even in times when it isn’t being used by anyone else at home. This means that these devices always work perfectly whenever someone needs hot water and they don’t let their loved ones get cold showers which can be pretty uncomfortable during winter.

Tempering valves are very popular devices that can dramatically improve the quality of your water supply; make sure you buy one today since it will last for many years to come and offer you with a warm shower every time you need it no matter how hot the water is. Not only that but these devices won’t cost a lot of money because most models are extremely affordable while others have special offers so you’ll definitely find something worth purchasing.

What is a Tempering Valve in a Hot Water System?

Tempering valves are devices that help reduce the heat produced by your hot water tank. The whole idea behind these devices is to maintain a constant temperature without allowing it to increase drastically. Usually, tempering valves are installed in areas where there isn’t a lot of cold water available and because of this, heating up the whole volume of water can lead to several problems such as scalding or even severe cases of dehydration which is why installing a tempering valve with your hot water system is always recommended.

If you’re searching for a tempering valve then make sure you choose from products that come with an official warranty since they will last much longer than low quality ones without causing any issues at all; also buying one from a reputable store will ensure that you receive a brand new device that has never been used before.

Tempering valves are very important devices since they maintain the temperature of water and prevent scalding from occurring which can be pretty uncomfortable; also if your hot water system is delivering water that is too hot then make sure you install a tempering valve as soon as possible since this will prevent someone in the home from getting hurt or suffering from dehydration.

The most popular tempering valve models today come with a number of features including dual connections on both max and min ports, this will enable users to have more control over their devices while enjoying safer showers at the same time. Many users often complain about specific areas where cold water isn’t available however, making sure your entire hot water system is properly installed and maintained will prevent you from suffering from water scalding which can be pretty uncomfortable.

Related Plumbing Resources

Plumbing Quotes

A plumber is a dedicated expert hired to repair and maintain all elements of the water supply including pipes, fittings, and apparatus. Read more…


Plumber Call Out Fee

One of those tradies that are vital to so many aspects of your house is a plumber. It might be routine maintenance, a major renovation project, or an emergency that simply cannot wait. Read more…


What is a Tradie

A skilled manual worker in a specific trade or craft is known as a “Tradie” (trade specialist). Read more…

Air Conditioning

What is a Soakwell?

Soakwells consist of a pot or container filled with a porous material such as perforated pipe, allowing rainfall to soak into the soil. Read more…