Latex Paint (Ultimate Guide)

Latex paint

What is latex paint called in Australia? | Why do we need to prime for latex paint? | Does primer need to be sanded? | Is there a difference between latex primer & sealer? | Acrylic paint vs latex paint | Differences between acrylic primer vs latex primer | Advantages of acrylic latex paints | Disadvantages of acrylic latex paint | What is acrylic latex paint? | How to tell if latex paint is oil-based? | Is latex paint water-based? | Can you put oil-based paint over water-based latex paint? | What is latex paint made of? | Is acrylic paint and latex paint the same? | Is acrylic latex paint waterproof? | Is latex paint a gloss paint? | Is latex paint a wall paint? | What is latex acrylic resin?

Latex paint is a type of paint that is made with synthetic resins and pigments that give it a smooth, glossy surface. Latex paint should not be used on metal surfaces like metals. They are often applied with an artist’s brush and roller in the traditional painting style or with spray equipment.

Latex paint has a distinctive character that defines its subtle use. It can be mixed with other pigments to get the right shade, or even tinted white if you need a certain colour but not necessarily colour.

Latex is easy to clean and does not stain easily because it has good resistance to dirt and moisture. The surface of latex paints can also be glossy when applied properly.

It’s important that we should have some knowledge about this kind of paint before applying it on our walls or furniture especially for those who do painting work as their profession or an avocation.

What is Latex Paint Called in Australia?

Latex paint is called “latex” in Australia.

Latex paints are often used on walls and ceilings in Australia due to their excellent covering power. In addition, they provide good adhesion and flexibility. They also have some other unique characteristics that make them different from oil-based or water-based paint.

Latex paint can flow freely over any surface without leaving streaks like oil paint does when applied on wall surfaces with straight brushstrokes. Water-based paints absorb moisture directly from the air causing increased chances of cracking but latex paint dries quickly after it has been applied.

Latex paint contains rubber which gives it elasticity and flexibility that are best suited to wall surfaces that have cracks, crevices or uneven surfaces. Oil-based paints are more suitable for large flat areas where a smooth finish is required.

Latex paint does not require priming before being applied on the surface of walls but you must use a primer if your surface is porous such as wood, older plaster or textured wallboards. But when applying latex paint on other materials like concrete or metal surfaces, it is best to prime them first

Why do We Need to Prime for Latex Paint?

The main function of primers in decorating is to provide an even coating across a substrate (surface) and improve its adhesion to the substrate.

Latex paint is unable to cover a surface that has an oil-based primer or enamel on it, so primers are needed for this reason. Primers can also protect surfaces from atmospheric pollution such as smoke and fumes during application and after painting. They also improve paint adhesion and create a better protective barrier against moisture penetration in porous substrates like old plaster walls where they may be used before painting with latex paints

Some types of resins in latex require the presence of mild solvents in order to achieve full flexibility when dried hence the use of solvent-base primer or sealer before applying latex paints on various surfaces including wood products, plastics and concrete which have poor ability to absorb water, as an example

Does Primer Need to Be Sanded?

Sanding of primer is not required in interior and exterior decorative use depending on the paint quality, wax or oil content of the surface being primed (masonry for example) and some other factors which will be discussed later. Latex primers are highly versatile, easy to apply and have good staying power because they tend to stick well to these surfaces hence reduced the need for sanding thus saving time as compared with using oil-based paints. Solvent-based primers can’t be sanded before painting but latex ones can if desired

Is There a Difference Between Latex Primer & Sealer?

The two names are sometimes used interchangeably since most people mix them up in their minds. But there is a difference, although in some cases the terms are used interchangeably. The main distinction between them is that sealers are usually thicker than primers because they contain more resins and additives hence primers tend to be thinner than sealers. Latex primers can also be thinned with water thus making them easier to apply, while the sealers cannot.

Latex primers have good quality paint at a low cost and are easy to use. The only disadvantage for some people is that they dry faster than sealers do so this is an important consideration when selecting a primer for your project

The most common type of primer used in Australia is latex-based primer while in the USA it is known as a water-based primer since water is mixed with latex to make a thinner paint.

Latex primers have good adhesion and flexibility, offer better resistance to cracking, peeling or chipping than oil or solvent-based paints and they are also less toxic and safer to handle compared with other types of coatings. The most common drawback for latex primers is that they dry fast so they have to be used very carefully, which makes their application suitable for those who know how to manipulate the time required before it dries and apply accordingly

Acrylic Paint vs Latex Paint

latex paint

You should also know that when you are working with latex paint, the priming process is far more important than it is for acrylic paint. Acrylics have a much higher viscosity so they tend to stick better to surfaces as compared with latex paints and as such don’t need priming.

However, this isn’t always the case in all situations because if your surface has a primer on it then you will need to remove it before applying latex paint because latex paint won’t adhere on top of a surface that has an oil-based primer or enamel on it.

Latex primers are also thicker and harder to apply than acrylic primers which means that they take longer to dry, and sometimes the paint does not dry properly, which can lead to cracking or peeling. Acrylic primers are also better at filling any minor surface imperfections like bumps, crevices or ridges etc as compared with latex primers because they tend to be smoother in appearance than latex paints.

Priming is a process that needs careful attention if you want it done right so proper planning is important before embarking on your painting project. Latex primer usually does a good job when used under most conditions but not all surfaces will require a primer for best results therefore knowing what kind of surface you have and the end result you want ensures that your job is done correctly.

Some professionals use solvent-based primers for external woodwork, brick or stonework surfaces because they are better than latex primers in these areas, but other professionals recommend using acrylic or latex paint on external surfaces since it can be easily repaired, unlike solvent-based primers.

Differences Between Acrylic Primer vs Latex Primer

The main difference between them is that acrylics have a high viscosity as compared to the low viscous property of latex so they stick well to the surface hence don’t need priming. Unlike latex paints which usually require adhesive primer for best results in many cases

Acrylic-based primers are harder to use and apply to result in cracks, peeling or chipping when applied improperly. A small percentage of acrylic may be added during the manufacturing process in order to make it flow better which makes them easy to apply but not as lasting as they are often prone to cracking and peeling

Since acrylic primers have a higher viscosity, the mixing ratio required for application is 1:1, unlike latex paints which vary between 2:1 to 3:1.

Advantages of Acrylic Latex Paints

The advantages are that acrylics don’t have much smell, they cost a little less than latex paints and they also appear smoother in appearance as compared with latex primers

Latex paints are thinner, easier to apply evenly, offer better adhesion and flexibility compared with acrylic paint which means that they are less likely to crack, peel or chip as compared with acrylic primers. They also dry faster than acrylic paints

Disadvantages of Acrylic Latex Paint

The main disadvantage of latex paints is that they need to be primed before you can apply them if you have a surface that already has enamel or oil-based primer on it. Cleaning excess latex paint is easy and quick but isn’t as simple with acrylics because the surface dries slowly thereby increasing the drying time, which can make it a little difficult to clean, unlike latex paints which usually dry quickly so you can easily clean them from your working area

This means you may need thicker coats of paint to hide any imperfections which mean more layers and time for the coating to dry.

What is Acrylic Latex Paint?

Acrylic latex paints are a hybrid of acrylics and latex paint. Acrylics are hard to apply and have a high viscosity which makes them prone to cracking or peeling.

Latex paints are cheaper, easier to apply, dry faster and offer better adhesion than the acrylics but can’t be applied on surfaces that already have enamel or oil-based primer because they will not adhere.

Acrylic primers are more difficult to use and easier to crack or peel since they’re harder to apply but offer a smoother finish than latex primers. Proper surface preparation is the key to applying any kind of paint. So if you want a good job on your project, choose a professional painter who has experience with both latex and acrylic paints and knows how to prepare surfaces properly for application because this may lead to better results.

How to Tell if Latex Paint is Oil-Based?

A solvent-based primer is usually recommended for brick or stone surfaces, but a water-based acrylic or latex paint may also work

If you are not sure what type of primer is on your surface, gently scrape off a small area to see if there is an oil-based primer that has darkened with time. If it’s darker than the surrounding area, it’s an oil-based primer.

Is Latex Paint Water-Based?

Latex Paint is water-based. It’s important to know that without the proper surface preparation latex paint will not adhere (stick) properly to some surfaces, particularly unpainted or uncoated wood and metal.

Can You Put Oil-Based Paint Over Water-Based Latex Paint?

Yes, you can put latex over acrylic. It is important to know that without the proper surface preparation, latex paint will not adhere properly to some surfaces like unpainted or uncoated woods and metals.

What is Latex Paint Made of?

Latex paint is a water-based alternative to oil-based products and offers several benefits over oil-based paint. Latex paint is strong and durable with a glossy gloss finish, which means it will protect whatever you want to paint for years. It’s also easy to clean up – latex paint will simply wipe off any surface it was applied to without causing damage like oil-based products might do.

There are also a lack of fumes associated with latex paints while applying, unlike oil-based paints which can be harmful if inhaled. Finally, latex paints offer better coverage than oils because they’re thinner so they don’t require as many coats as an oil-based product would require, which saves time and money on the project.

Is Acrylic Paint and Latex Paint the Same?

Acrylic and latex are not the same. Oil-based paints dry slowly and need thinner coats, while water-based acrylics dry quickly so you can clean them up faster. Latex paints also require a primer before application, which acrylics do not

Is Acrylic Latex Paint Waterproof?

High-quality latex paint can be made water-resistant with a sealant such as a varnish, and acrylic paint can be made waterproof with a product called gesso.

Is Latex Paint a Gloss Paint?

A gloss paint finish is the desired finish for latex paints while an enamel or matte finish is the most common type for acrylics, it may even be possible to produce a semi-gloss look in the finishes depending on the skills of the painters. Latex paint offers a durable coating that will protect whatever you want to paint for years and they are easy to clean up.

Is Latex Paint a Wall Paint?

Wall paint is a type of paint that you can put on the surface of walls. Latex paints are water-based, which means that they are easy to clean up and durable. Acrylic paints are oil-based so they’re more likely to peel. Latex paint offers better coverage than oils because they’re thinner so they don’t require as many coats as an oil-based product would require, which saves time and money on the project. The only downside to latex paints is that if your surfaces aren’t properly prepared, they will not adhere properly.

What is Latex Acrylic Resin?

Latex acrylic resin is a hybrid material that is combined with acrylic resin and natural latex. This results in a material that resembles the properties of both latex and acrylic paint.

It offers the durability and longevity of latex paint with some of the benefits found in acrylic paints and this offers a versatile solution for many different surfaces.

Related Painting Resources

Painting Quotes

Painting is one of the most popular and cost-effective ways to update a room, house, or entire home. But how much does house painting cost in Australia? Here at Specifier, read about it.


Painter Call Out Fee

A fresh coat of paint is one of the simplest and most cost-effective methods to breathe new life into your house, whether you’re selling it or just want to refresh and update its appearance. Read how to do it at a minimal cost.


Painting the Exterior of a House Cost

Exterior paint for your home may be a fantastic method to freshen up its appearance. Read more…


What is a Tradie

A skilled manual worker in a specific trade or craft is known as a “Tradie” (trade specialist). Read more…

Air Conditioning